4X Auto Truck Car Acrylic Foam Double Sided Attachment Tape Adhesive 3m x 10mm. About 10ft long each roll..
( You get 4 Rolls)
This Tape is used for the
attachment of a wide variety of automotive exterior and interior trim
including body side moldings, cladding’s, rock panel trim, wheel flares,
bumper trim and most any automotive trim. Also Great to use on LED
strip mountings, Bathrooms, also indoor or outdoor projects.
* Brand New and High quality.
* Strong adhesion to automotive substrates
* Weather and car wash resistant.
* Can be used on textured surfaces, such as painted cement or brick.
* High-strength core maintains a thin, consistent bond line.
* Easy liner release.
The Double-sided adhesive on the glued side viscosity is not very
strong at first, Please stick and let sit for 24 hours then effect is
very strong, the longer the more
How to use:
1.Clean up, keep dry
2. Stick red rubber back side slowly, with tools, leveling and disclose the back glue.
3. If the stick tape length is less than 10 cm, can stick red gum all off again.
4. After the paste moderate yank, within 24 hours, please don’t wash the car.
4 x Foam Double Sided Tape 3m x10mm
If you live in Alaska, Hi, PR, VI your item will take much longer for you to get it